MPLS - L2MPLS / L2 Circuits
L2MPLS L2 Circuits Before MPLS MPLS Enabled Core: Required: Head office and Branch office to be interconnected on L2 which is of full redundancy on Service Provider Core Network Configuration: 1. Select VLAN to use for the circuit. For our case we assign VLAN 200 note: Configuration only done on Edge Devices (PE) 2.Configure on PE-1 Defining presudowire class to MPLS; #pseudowire-class ethernet-port encapsulation mpls #exit Note: fa0/0 is the interface facing HQ #show run int fa0/0.200 #interface FastEthernet0/0.200 #encapsulation dot1Q 200 #xconnect 3.3.3.3 200 pw-class ethernet-port 3. Configure on PE-3: Defining presudowire class to MPLS; #pseudowire-class ethernet-port #encapsulation mpls #exit Note: fa0/0 is the interface facing HQ # no shut #interface FastEthernet0/0.200 #encapsulation dot1Q 200 #Xconnect 1.1.1.1 200 pw-class ethernet-port Troubleshooting; Make sure that the CEF is enabled ...